Announcement

Collapse
No announcement yet.

Boot a WinPe usb version

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Boot a WinPe usb version

    Boot a computer (with RollBackRX installed) WinPe usb version result in that the Drive C: partition is damaged and have to be formatted...
    If i uninstall RollbackRX booting from a WinPe version is all ok....

  • #2
    can you try this with Rollback Rx PRO? Please let me know.
    Regards

    Comment


    • #3
      May I use the trial version for this purpose?

      Comment


      • #4
        I have try with the RX PRO version BTW the problem is the same: every time I boot from a (usb/cd) winPE version (Aomei, strelec, BartPe,etc) the drive c: partition appears damaged and the system ask to me to format drive c: Thanks

        Comment


        • #5
          Hello,

          WinPE or Strelec CDs are not see damage. Just looks RAW drive. If you do "chkdsk c:/f" you'll see normal drive. This is an Rollback issue. If Horizon fix this issue, may wonderfull.

          Thanks,
          Murat

          Comment


          • #6
            Hi!!,
            unfortunelly running "chkdsk c:/f" under winpe strelec result in hd c: totally broken!!
            No problem for me coz before try this I performed a full back with Macrium, BTW seems to me that performing a chkdsk always result in getting a damage hd....
            I hope there will be a fix for this situation.

            Comment

            Working...
            X