Announcement

Collapse
No announcement yet.

BSOD Windows 7 and 10 with vs 10.5, 10.6, and 10.7

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • BSOD Windows 7 and 10 with vs 10.5, 10.6, and 10.7

    Hello there, I'm facing major problems for a large customer of mine that has been using your pro version of the software since 10.5, always has had something of the same issue.

    This happens on 10.5 and 10.6 on Windows 7 and Windows 10, and also on 10.7 on Windows 7 and Windows 10. So it's not specifically X or Y version of the software, or X or Y version of Windows, as it happens on all. Some computers are SYX clones, other's are HP, so again, not specifically hardware related as they all have different hardware. Were talking about

    When I uninstall DV it works fine, no problems booting, etc. So the only way I've found to fix this problem is by restoring to LGK, then uninstalling DV, reboot windows, then re-install DV. This is the only way to fix it. Normally this lasts a couple weeks without issues, but I just did two yesterday and both are today again with the same issues. Were talking about 30 computers all mixed with different versions of the software and windows, so I've tested all scenarios to see if it's something specific, it happens to all at some point.

    Here are two screenshots of the issues I am facing:

    http://cdn.microthosting.com/imgs/Sc...1_10-53-21.png
    http://cdn.microthosting.com/imgs/Sc...1_10-53-58.png

    If you'll notice these are two very different errors, but all the errors we normally face are missing files, and windows not being able to boot without the BSOD.

    Thanks for any help you can give me!
Working...
X